Kartek Off-Road 23" 4340 Chromoly IRS Axles For 28 Spline Porsche 930 CV Joints
OUT OF STOCK - ETA END OF APRIL
Estimate Shipping
Price: $470.00
Call us for availability BEFORE you order this item! We may be low or out of stock on it.
Sold As:
2 Porsche 930 Axles
Part Number: BJE2423
MFG Number:
2423
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov The above image is a representation of this item. Actual item may vary. If it's crucial to what you're working on, call the store at 951-737-RACE, and one of our sales reps will be happy to email you a current photograph. Product Information:
For longer and wider VW beetle trailing arms on a Baja Bug or Sand Rail Buggy. These American made 4340 Chromoly IRS axles are specially designed for the needs of today's off-road racers.
-
Specifications:
- 4340 Chromoly alloy steel
- 28 Spline
- 45 Degree pressure angle
- 23" Total length
- 22-11/16" Clip to clip length
- 3" Spline length per side
- EMPI: 16-2217-0
- EMPI: 16-2239-0 (kit)
- Latest Rage: 525210-23
- Sway-A-Way: 2423
- Check your toe in/out wheel alignment.
- Lift the hub up, so that if it did have an axle, the axle would be at zero degrees, parallel to the ground.
- Measure from the BOTTOM of the drive flange cup on the transmission to the BOTTOM of the stub axle cup on the brakes. Reference Figure A
- Subtract 1/4" to 3/8". That is your TOTAL axle length.
- Check both sides of the vehicle. It is very common to have two different length axles.
- Now use a PVC pipe as a mock-up axle. Cut grooves 1/4" down on either end into each end of the PVC for your clips. Install your CV joints and mock-up axle.
- Lift the vehicle so the tires drop down to full droop. Depending on the type of CV joint you're using, will govern how much angle you can handle at full droop.
- Grab your mock-up axle and make sure that you have 1/4" to 3/8" free play. Reference Figure B
- If you have 1/4" to 3/8" free play at zero degrees and at full droop then you're perfect.
Cross Reference Part Numbers:
Measuring axle length
Related Parts
Fortin Racing 300m Material Polished Porsche 930 CV Joint Star For 28 Spline Axles
In Stock
Price: $105.00
EMPI Stage 1 Porsche 930 CV Joint For 28 Spline Axles With 4130 Chromoly Cage
In Stock
Price: $89.99
EMPI Stage 2 Porsche 930 CV Joint For 28 Spline Axles With 4130 Chromoly Cage
In Stock
Price: $104.99
EMPI Lightened Stage 3 Porsche 930 CV Joint For 28 Spline Axles With 4130 Chromoly Cage
In Stock
Price: $169.99
Kartek Off-Road Polished Porsche 930 CV Joint For 28 Spline Axles With 4130 Chromoly Cage
In Stock
Price: $230.00
Kartek Off-Road Polished Porsche 930 CV Joint For 28 Spline Axles With 300m Cage
In Stock
Price: $250.00
Kartek Off-Road Lightened And Polished Porsche 930 CV Joint For 28 Spline Axles With 300m Cage
In Stock
Price: $270.00
EMPI 33 Spline Adapter Chromoly Drive Flanges For Type-1 Bug Transmission To Porsche 930 CV
In Stock
Price: $114.99
EMPI 37 Spline Adapter Chromoly Drive Flanges For Type-2 Bus 002 Transmission To Porsche 930 CV
In Stock
Price: $113.99
EMPI 40 Spline Adapter Chromoly Drive Flanges For Type-2 Bus 091 Or Vanagon To Porsche 930 CV
In Stock
Price: $111.99
EMPI 16-2306-0 Chromoly Adapter Stub Axles With Type-1 Beetle Shaft To Porsche 930 CV Joint
In Stock
Price: $111.99
Standard Length Porsche 930 CV Joint Six Point Allen Bolt 3/8-24 x 2-1/4" Long
In Stock
Price: $1.39
EMPI 86-2515-0 High Speed Low Angle One Piece Porsche 930 Rubber CV Axle Boot With Flange
In Stock
Price: $42.95
Porsche 930 Chromoly Single Axle Boot Flange For 86-9301 CV Axle Boots 3/8" Flange Lip
In Stock
Price: $43.99
EMPI Porsche 930 Steel Single Axle Boot Flange For 862326, 869321 or 9345F CV Axle Boots
In Stock
Price: $39.99
AGM Porsche 930 Steel Single Axle Boot Flange For 862326, 869321 or 9345F CV Axle Boots
In Stock
Price: $40.00
