NEO Synthetic Racing Oils CV500 NLGI #2 High Temperature CV Joint Grease 12.5oz Grease Gun Tube

NEO Synthetic Racing Oils CV500 NLGI #2 High Temperature CV Joint Grease 12.5oz Grease Gun Tube

Suggested: $47.99 Kartek Price: $39.99

Sold As: 1 Tube of CV Grease

Part Number: NEOCV500G

CA Prop 65 Warning




NEO Synthetic Racing Oils CV500 NLGI #2 High Temperature CV Joint Grease 12.5oz Grease Gun Tube
CV500 Grease Constant Velocity & Articulated Joint Lubricant

NEO CV500 Grease is a complex blend of mineral oils, synthetic esters and lubricating solids. NEO CV500 should be used when temperature extremes are not a problem (See note below). Their designed use is for severe sliding contact such as extremely heavily loaded ways and guides, slow large diameter ball and roller bearings, bushings, linear and oscillating mechanisms and open gears. Articulated, CV and Universal Joints subject to the hardest shock loading, angularity and radial forces such as found on all terrain vehicles. Can be used on sensitive metallurgy including copper, silver, tin and aluminum and their alloys. Exceptionally resistant to water wash conditions including emulsions. Special compounding and lubricating solids provide superior antiseize characteristics and exceptional acid resistance.

Note: NEO HPCC#1 should be used when extreme high and low temperatures are encountered or sustained. Elevated temperatures indicate extra protection is needed.

Standard Applications:
Constant velocity couplings (CV joints) and industrial applications including linear reciprocating mechanisms, heavily loaded ways & guides, spline couplings subject to linear motion & heavy loads in either direction, press fit & assembly operations, jack screws, mechanical presses, and slow large diameter ball & roller bearings.

Special Applications:
Antiseize to 1200°F. Assembly and spline lubricant, racing cam lubricant, press fitting stainless steel, high temperature open gear lubricant, mechanical presses, dipper sticks & fasteners. Pump and valve lubrication in corrosive environments. MoS2 (Moly) is recommended for all constant velocity joints except for double articulated spider types.

Specifications:
NLGI Grade 2.5
Worked Penetration @ 60 Strokes 250
Dropping Point, °C 315
Base Oil, ISO VG Grade 1000
Pour Point, °C, (F) +5 (+41)
Flash Point, °C, (F) +270 (518)
Shell 4 Ball EP, weld load Kg >>Does not Weld @ 800Kg<<
Load Wear Index 200

Related Parts