Jamar Performance Pro-X Porsche 934 Outboard Floater Hub Brake Kit HD 6 Piston Calipers 14" Rotors
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Note: Jamar no longer includes the hub socket wrench in this kit. You must buy it separately.
Jamar's complete disc brake hub kits include everything for both sides of the vehicle that you'll need, EXCEPT adapter fittings for whatever type of brake line you plan to use, lug nuts, CV joints and outer axle boots. The adapter fittings are listed below.
This kit is available with several different snout options allowing you to convert from a competitor's brake kit over to Jamar's. You'll need to measure the inside diameter of the trailing arm plate and count the amount of bolt holes that you have. See below picture for reference.
Specs:
Calipers are six piston progressive
Two 1-1/4" Diameter Stainless Steel Pistons
Four 1-1/2" Diameter Stainless Steel Pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Hubs have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
proam pro am pro-am tatum motorsports fortin racing pme performance motorsports engineering midboard mid-board out-board summers brothers
Jamar's complete disc brake hub kits include everything for both sides of the vehicle that you'll need, EXCEPT adapter fittings for whatever type of brake line you plan to use, lug nuts, CV joints and outer axle boots. The adapter fittings are listed below.
This kit is available with several different snout options allowing you to convert from a competitor's brake kit over to Jamar's. You'll need to measure the inside diameter of the trailing arm plate and count the amount of bolt holes that you have. See below picture for reference.
What's Included:
Two 5 Lug VW Pattern (5 on 205mm) Hubs
Two 6 Piston Calipers With Pads
Two Hub Caps
Bearings
Seals
Inner Axle Boots
Outer Axle Boot Flanges
What's NOT Included:
Hub Socket Wrench
Brake Line Adapter Fittings
Lug Nuts
934 CV Joints (Drilled For 1/2")
Outer Axle Boots (Leather Or Nylon)
Two 5 Lug VW Pattern (5 on 205mm) Hubs
Two 6 Piston Calipers With Pads
Two Hub Caps
Bearings
Seals
Inner Axle Boots
Outer Axle Boot Flanges
What's NOT Included:
Hub Socket Wrench
Brake Line Adapter Fittings
Lug Nuts
934 CV Joints (Drilled For 1/2")
Outer Axle Boots (Leather Or Nylon)
Calipers are six piston progressive
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Hubs have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
proam pro am pro-am tatum motorsports fortin racing pme performance motorsports engineering midboard mid-board out-board summers brothers
