PME Dakar Series Porsche 934 - 33 Spline Midboard Floater Hub Kit 6 Piston Calipers 13" Rotor
Price: $7,999.99
Call or email for availability
Sold As:
1 Complete Disc Brake Kit
Part Number: PMERH5205MBF33HD
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Note: You'll have to run 17" wheels. If you have pre-existing trailing arms that used the smaller 12-1/4" rotor hub kit, you'll have to change your arm plates. The arm plate for this kit has a slightly longer caliper bracket.
All of PME's Midboard floater hub kits include their double axle boot flange system. The inner rubber boot is included but the outer boot is sold separately. This gives you the option of running a leather or rubber outer boot. The AGM CV saver diaphragm is sold separately. You'll use the 4-15/16" diaphragms listed below with this hub kit.
PME's double boot kits features a pinch design that keeps the small inner boot firmly sealed under harsh conditions. It does this by using two flanges that bolt together pinching the inner boot in place. The kit's outer flange features a lip for a large outer boot.
What's Included:
Two 5 Lug VW Pattern (5 on 205mm) Hubs
Two Calipers With Pads
Two Hub Caps
Two CV Joints
Two Double Axle Boot Flanges
Inner Axle Boots (You'll need outer axle boots listed below)
Specs:
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Rotors have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
All of PME's Midboard floater hub kits include their double axle boot flange system. The inner rubber boot is included but the outer boot is sold separately. This gives you the option of running a leather or rubber outer boot. The AGM CV saver diaphragm is sold separately. You'll use the 4-15/16" diaphragms listed below with this hub kit.
PME's double boot kits features a pinch design that keeps the small inner boot firmly sealed under harsh conditions. It does this by using two flanges that bolt together pinching the inner boot in place. The kit's outer flange features a lip for a large outer boot.
Hub Kit Features:
Triple Sealed: Two Bearing Seals / One V-Ring Seal Per Hub
Uses Industry Standard 15 Bolt Arm Plates That Have a 7" Center Hole
Made Using Heavy Duty Race Quality 7075 Aerospace Grade Aluminum
Hard Anodized: Hubs Will Have A Tan To Grey Appearance
Rotor Diameter: 13"
Wilwood 6 Piston Calipers
14mm 1.5 Thread Wheel Studs
Two 5 Lug VW Pattern (5 on 205mm) Hubs
Two Calipers With Pads
Two Hub Caps
Two CV Joints
Two Double Axle Boot Flanges
Inner Axle Boots (You'll need outer axle boots listed below)
Specs:
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Rotors have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
