Kartek Off-Road Weld On 1-1/2" Lower King Pin Sleeve For Our Econo Uprights
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
This is a parts list for building our econo uprights. Obviously, if you require a different center to center you can mix and match our king pins, misalignments and spindle bolts to get your desired height.
-
9-1/4" ECONO UPRIGHTS
- 1) 3/4X15SB - 15" Bolt
- 1) HMA10034TPRM Misalignment Spacer
- 3) HMA10034TRN Misalignment Spacers
- 1) 6-1/2" King Pin Upper Sleeve
- 1) 1-1/2" King Pin Lower Sleeve
- 1) A21675 Nyloc Nut
- 1) Set Of Gussets
- 1) Clevis (Choice of 10 / 12 / 14 Degree Inclination)
- 1) Caliper Bracket (Choice of 2 Piston For 10" Rotor or 4 Piston For 11" Rotor)
- 1) 3/4X16SB - 16" Bolt
- 1) HMA10034TPRM Misalignment Spacer
- 3) HMA10034TRN Misalignment Spacers
- 1) 7-5/8" King Pin Upper Sleeve
- 1) 1-1/2" King Pin Lower Sleeve
- 1) A21675 Nyloc Nut
- 1) Set Of Gussets
- 1) Clevis (Choice of 10 / 12 / 14 Degree Inclination)
- 1) Caliper Bracket (Choice of 2 Piston For 10" Rotor or 4 Piston For 11" Rotor)
- 1) 3/4X16SB - 16" Bolt
- 1) HMA10034TPRM Misalignment Spacer
- 3) HMA10034TRN Misalignment Spacers
- 1) 7-7/8" King Pin Upper Sleeve
- 1) 1-1/2" King Pin Lower Sleeve
- 1) A21675 Nyloc Nut
- 1) Set Of Gussets
- 1) Clevis (Choice of 10 / 12 / 14 Degree Inclination)
- 1) Caliper Bracket (Choice of 2 Piston For 10" Rotor or 4 Piston For 11" Rotor)
10-1/4" ECONO UPRIGHTS
10-1/2" ECONO UPRIGHTS
