Steering Universal Joint 5/8-36 Spline To 17mm 36 Toyota Spline For Our Electric Power Steering Kit

Steering Universal Joint 5/8-36 Spline To 17mm 36 Toyota Spline For Our Electric Power Steering Kit
Rough Shipping Estimate
Estimate Shipping
Price: $59.99
In Stock
Sold As: 1 Universal Joint

Part Number: SWT0737

MFG Number: 401-50737


Order this item to pickup at our Corona, CA store. You'll pay when you get here. You can pay by credit card, cash or PayPal and we'll contact you when this order is ready for pickup.


California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

Description

Specifications:
Max Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #07: 5/8" 36 Spline With Set Screw 0.620 Major Diameter
End #37: 11/16" 36 Spline With Set Screw

We call this our 17mm u-joint for our electric power steering kits however the true dimension of it is 11/16" or 17.5mm so if you're looking for precisely 17mm then this u-joint will be a little large on the splines.

17mm = 0.669 Inches
17.5mm = 0.689 Inches
11/16" = 0.688 Inches

If you're trying to replace one of Sweet Mfg's u-joints and haven't removed it from the car/truck/vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Each end of the u-joint will have a part number engraved in it. Below is a complete list of Sweet Mfg's part numbers. For example if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 forty eight spline. We stock every common combination of Sweet Mfg's universal joints. If there are specific ends that you need on both sides of the universal joint, we can special order it from Sweet for you, but there's usually a 4 week wait and special order universal joints are not refundable.

Sweet Mfg Universal Joint Example

Related Parts


Sweet Mfg Part Numbers:

1" Double D Note: OEM GM columns measure slightly less than 1" while I DIDIT and Flaming River aftermarket steering columns measure a true 1". DO NOT interchange these u-joints.

  • 06 = 3/4" Smooth Bore Weld On
  • 07 = 5/8" 36 Spline 0.620 Major Diameter Stiletto Legend Car
  • 08 = 5/8" Smooth Bore Weld On
  • 09 = 1994 and Later Ford
  • 10 = 3/4" 48 Spline
  • 11 = 13/16" 36 Spline Chevy Power And Sweet Steering Box
  • 12 = 3/4" 36 Spline Chevy Manual Steering And Ford Pinto Power
  • 13 = 9/16" 26 Spline Ford Pinto Manual
  • 14 = 5/8" 36 Spline 0.600 Major Diameter Chevy Vega
  • 15 = 3/4" 30 Spline New Chevy Power Or Sweet INT Rack
  • 17 = Chevy Corvette Top Set Screw
  • 17 = Chevy Corvette Bottom Set Screw
  • 18 = 1" 48 Spline Stock GM
  • 19 = 3/4" Double D
  • 20 = 1" Double D OEM GM Steering Column
  • 21 = 3/4" 20 Spline Sweet Steering Column And Woodward Rack
  • 23 = 1" Double D - Aftermarket I DIDIT Or Flaming River Steering Column
  • 24 = Jeep 3D Flats
  • 30 = 5/8" 36 Spline 0.605 Major Diameter Flaming River And Chevy Vega
  • 32 = 7/8" Smooth Bore With Keyway For Charlynn
  • 34 = 19/32" 29 Spline For Yamaha Rhino
  • 35 = 15mm for VW and Mendeola Hockey Shifter With Set Screw
  • 36 = 1/2" Smooth Bore
  • 37 = 11/16" 36 Spline Toyota (17mm for our Electric Power Steering Units)
  • 74 = Jeep Pincher
Scroll Top