Steering Universal Joint 3/4 Smooth To 17mm 36 Toyota Spline For Our Electric Power Steering Kit

California Prop 65 Warning. This item may cause cancer or reproductive harm. For more info visit https://www.p65warnings.ca.gov/

Steering Universal Joint 3/4 Smooth To 17mm 36 Toyota Spline For Our Electric Power Steering Kit

Suggested: $74.99 Kartek Price: $57.99

Sold As: 1 Universal Joint

Part Number: SWT0637

MFG Number: 401-50637



Steering Universal Joint 3/4 Smooth To 17mm 36 Toyota Spline For Our Electric Power Steering Kit
Specifications:
Max Operating Angle: 30 Degrees
Material Type: Steel
Finish: Black Oxide
End #06: 3/4" Smooth Bore Weld On
End #37: 11/16" 36 Spline With Set Screw

We call this our 17mm u-joint for our electric power steering kits however the true dimension of it is 11/16" or 17.5mm so if you're looking for precisely 17mm then this u-joint will be a little large on the splines.

17mm = 0.669 Inches
17.5mm = 0.689 Inches
11/16" = 0.688 Inches

If you're trying to replace one of Sweet Mfg's u-joints and haven't removed it from the car/truck/vehicle yet, you can turn the steering column to see the part number engraved on both sides of the universal joint.

Each end of the u-joint will have a part number engraved in it. Below is a complete list of Sweet Mfg's part numbers. For example if one end of the u-joint says 06 and the other end says 10 then that u-joint is 3/4 smooth weld on to 3/4 forty eight spline. We stock every common combination of Sweet Mfg's universal joints. If there are specific ends that you need on both sides of the universal joint, we can special order it from Sweet for you, but there's usually a 4 week wait and special order universal joints are not refundable.

Sweet Mfg Universal Joint Example

Related Parts


Sweet Mfg Part Numbers:

1" Double D Note: OEM GM columns measure slightly less than 1" while I DIDIT and Flaming River aftermarket steering columns measure a true 1". DO NOT interchange these u-joints.

  • 36 = 1/2" Smooth bore

  • 13 = 9/16" 26 Spline Ford Pinto manual

  • 08 = 5/8" Smooth bore weld on
  • 14 = 5/8" 36 Spline 0.600 Major dia. Chevy Vega
  • 30 = 5/8" 36 Spline 0.605 major dia. Flaming River
  • 07 = 5/8" 36 Spline 0.620 majo r dia. Stiletto Legend

  • 06 = 3/4" Smooth bore weld on
  • 19 = 3/4" DD weld on
  • 21 = 3/4" 20 Spline Sweet column and Woodward
  • 15 = 3/4" 30 Spline Chevy power or Sweet INT rack
  • 12 = 3/4" 36 Spline Chevy manual / Ford Pinto pwr
  • 10 = 3/4" 48 Spline Kartek steering shafts

  • 11 = 13/16" 36 Spline Chevy pwr / Sweet strng box

  • 32 = 7/8" Smooth bore with keyway for Charlynn

  • 18 = 1" 48 Spline stock GM
  • 20 = 1" DD OEM GM steering column
  • 23 = 1" DD I DIDIT Or Flaming River steering column

  • 09 = 1994 and later Ford
  • 17 = Chevy Corvette top set screw
  • 17 = Chevy Corvette bottom set screw
  • 34 = 19/32" 29 Spline for Yamaha Rhino
  • 35 = 15mm for VW and Mendeola shifter
  • 24 = Jeep 3D flats
  • 74 = Jeep pincher

  • 37 = 11/16" 36 Spline for Kartek 220w EPS kits
  • 73 = 22mm 20 Spline for Kartek 400w EPS kits
  • 75 = 17mm 36 Spline for other brands EPS kits