Shock Eyelet To 5/8" Stem Conversion Adapters For 2" Or 2-1/2" Fox Or King Shocks 1-7/16" Gap

Also works on 3" shocks if the distance from the center of the bolt hole to the top edge of the top cap is short enough to clear the bolt that's welded into this clevis (7/8" from uniball center to top of aluminum to be safe). Top stem is 5/8"-18 thread and does NOT include a nut or washer. The bolt, nut, and washers for the shock are also NOT included. Typically customers purchase a 3" bolt.

If you have Fox 213-18-005-C spacers on a 2.0" shock (for 1-1/4" tab width), purchase ONE 213-18-009-A spacer per shock. You'll use one spacer for 1-1/4" tab width and one for 1-1/2" tab width and be just about perfect to fit into the gap of the clevis.

If you have Fox 213-01-036-D spacers on a 2.5" or 3.0" shock, clamp the adapters in a bench vice and bend them out slightly with a Crescent wrench for the 1-1/2" gap.