Specifications:

10 lbs Fluoro FS Clean Agent

Aluminum Cylinder

Overall Length: 17-1/4"

Cylinder Diameter: 5-1/4"

Includes:

1) 10 Pound Bottle Filled With Fluoro FS

2) Flat Surface Aluminum Mounting Brackets

2) Murray TB537ss Heavy Duty 5-3/8" T-Bolt Clamps

1) 15 Foot Pull Cable

1) Safety Tether With Hairpin Clip

10') 1/4" Aluminum Tubing

3) AN #4 3-Way Discharge Nozzles

1) AN #4 Tee Fitting

8) AN #4 Tube Nuts

8) AN #4 Tube Sleeves

1) AN #4 Male to 1/8" NPT Pipe Thread Adapter Fitting

Notes: The 1/8" diameter safety pin prevents the bottle from discharging until you install the cable. Once the cable is installed, you'll remove the safety pin and arm the system. Keep the safety pin in case you ever have to replace or remove the cable. If you lose the safety pin, we do sell the separately.

The head on this bottle is only designed for one cable. You can not add a second cable to it. If you are racing, check with your racing association to confirm if a single cable system is acceptable or if they require a dual cable system.

The cable is 15 feet long and can be cut-to-length. The handle portion mounts to a 1/2" tab or hole in your dash.

AN -4 fittings have 37 degree flare whereas SAE fittings have a 45 degree flare. You will need a 37 degree flaring tool for the tubing.

There is a -4 fitting already threaded into the head of the bottle. On the opposite side is a 1/8" NPT allen plug. You can remove that plug and use the supplied adapter fitting from the kit if you need 2 discharge lines.