Specifications:

10 lbs Fluoro FS Clean Agent

Aluminum Cylinder

Overall Length: 17-1/2"

Cylinder Diameter: 5-1/4"

Includes:

1) 10 Pound Bottle Filled With Fluoro FS

2) Flat Surface Aluminum Mounting Brackets

2) Murray TB537ss Heavy Duty 5-3/8" T-Bolt Clamps

2) 15 Foot Pull Cables

2) Guide Tubes For The Cables

2) Safety Tether With Hairpin Clips

10') 1/4" Aluminum Tubing

3) AN #4 3-Way Discharge Nozzles

1) AN #4 Tee Fitting

8) AN #4 Tube Nuts

8) AN #4 Tube Sleeves

1) AN #4 Male to 1/8" NPT Pipe Thread Adapter Fitting

Notes: The head on this bottle can be used with one or two cables. If you only use one cable, Safecraft provides a plastic screw to plug up the second cable's hole. If you are racing, check with your racing association to confirm if a single cable system is acceptable or if they require a dual cable system.

The cables are 15 feet long and can be cut-to-length. The handle portion mounts to a 1/2" tab or hole in your dash.

AN -4 fittings have 37 degree flare whereas SAE fittings have a 45 degree flare. You will need a 37 degree flaring tool for the tubing.

There is a -4 fitting already threaded into the head of the bottle. On the opposite side is a 1/8" NPT allen plug. You can remove that plug and use the supplied adapter fitting from the kit if you need 2 discharge lines.