IMI Performance 104 1.6HP 12V High Torque Starter For 6 Rib 091 Or 094 Bus For 12V Flywheel

IMI Performance 104 1.6HP 12V High Torque Starter For 6 Rib 091 Or 094 Bus For 12V Flywheel
Rough Shipping Estimate
Estimate Shipping
Price: $224.99
Call or email for availability
Sold As: 1 Starter

Part Number: KTKIMI104

MFG Number: 104


Order this item to pickup at our Corona, CA store. You'll pay when you get here. You can pay by credit card, cash or PayPal and we'll contact you when this order is ready for pickup.


California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

Description

This is HiTorque's standard self supporting gear reduction starter. HiTorque does offer the 104 with three different size motors depending on your needs. See below picture for reference. This starter is self supporting. In a VW transmission you don't need to run the bronze support bushing that normally holds the other side of the starter.

Specifications
  • Rotation: CCW
  • Kilowatts: 1.2
  • Horsepower: 1.6
  • Voltage: 12v
  • GP9 Nine Tooth 25.4mm Gear
  • Fits 12 Volt 130 Tooth VW Style Flywheels
  • 5/16" Battery Cable Post

  • Fits Transaxles:
  • VW Type 2 Six Rib 091 Bus (See Note)

  • Note: On some VW type 2 six rib bus 091 transaxles, some builders will put the shorter 002 style bell housing and input shaft on it, which allows you to use the 101 series starter. If your 091 transaxle has the stock bell housing and input shaft, then you'll use the longer 104 series starters.
    The mounting flange on HiTorque's starters can be rotated to several positions allowing you to move the starter's motor out of the way of any chassis braces that might be in the way.

    imi performance products inc hitorque starters rotating flange

    If you're uncertain if you're bus transmission has a 002 or a 091 bell housing measure the depth from where the starter bolts onto the transmission down to the starter bushing. If the distance from where the starter mounts onto the transmission to the starter bushing is 2 inches then you need to use the 101 series style starter. If the distance from where the starter mounts onto the transmission to the starter bushing is 2.5 inches then you need to use the longer 104 series starter.

    imi performance products inc hitorque starters 3 rib 002 bus versus 6 rib 091 bus bellhousing

    imi performance products inc hitorque starters solenoids comparison

    Related Parts

    Scroll Top