Kartek Offroad 3/4:1 Ratio Hard Anodized End Load Rack And Pinion For Mini Buggies Or Trophy Karts
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Our billet 6061 hard anodized aluminum end load steering rack and pinion for motorcycle powered mini buggies or Trophy Karts has very quick steering. Only a 3/4 turn of the steering wheel from lock to lock. You can use Coleman's ProLite steering reducers to slow the rack down.
Note: This rack does NOT include boots. You'll have to make your own. Use our custom made mounting bracket (sold separately). It has a slight bend in it to pitch the pinion splines upward towards the driver.
Note: This rack does NOT include boots. You'll have to make your own. Use our custom made mounting bracket (sold separately). It has a slight bend in it to pitch the pinion splines upward towards the driver.
-
Specs:
- American Made
- Spline: 3/4" 48 spline
- Depth: 2-7/8" (not including pinion)
- Width: 6-3/16" (body only)
- Travel: 3-3/8"
- Uses 5/16" bolts and nuts
- Tie Rod Mounting Holes: 3/8"
- Clevis Width: 5/8"
- Tie Rod Mounting Width: 13-1/2" on center
- Tie rods must be in FRONT of spindles
- Approx. ONE 3/4 Turn lock to lock
