Kartek Off-Road Custom Made Chromoly Sway Bar Link For 1/2" Heim Joints And Rod Ends On Both Sides

We MUST know which brand of heim joints / rod ends that you're going to use. Each brand, FK Bearing, Aurora Bearing and NHBB New Hampshire Ball Bearings all have different tolerances on their thread, so we use different taps depending on the brand you're using.
Kartek Off-Road Custom Made Chromoly Sway Bar Link For 1/2" Heim Joints And Rod Ends On Both Sides

Suggested: $79.99 Kartek Price: $59.99

Sold As: 1 Sway Bar Link

Part Number: KTKNCMTR1

CA Prop 65 Warning


Kartek Off-Road Custom Made Chromoly Sway Bar Link For 1/2" Heim Joints And Rod Ends On Both Sides
We MUST know which brand of heim joints / rod ends that you're going to use. Each brand, FK Bearing, Aurora Bearing and NHBB New Hampshire Ball Bearings all have different tolerances on their thread, so we use different taps depending on the brand you're using.

American made using 3/4" x 0.188" wall Chromoly tubing at our Corona, CA location. Orders must be in before 12:00 Noon PST for same day shipping. Sway bar links are made to order and are NOT REFUNDABLE!

Normally we tap one side left hand thread and the other side right hand thread. If you require both sides to be right hand thread then please put that in the notes above. BOTH ends of these sway bar links are 1/2"-20 thread. Besides sway bar links, they can be used on SOMETHING SMALL such as a golf cart or go kart as tie rods, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, traction bars, or turn buckles.

rod ends and heim joints assembly

How is tie rod length measured?

Related Parts