Jamar Performance Trophy Truck Passenger Side 3-1/4" Hollow Full Floater Hub Rear End Spindle Snout

WarningCalifornia Prop 65 Warning. This item may cause cancer or reproductive harm. For more info visit https://www.p65warnings.ca.gov/

Jamar Performance Trophy Truck Passenger Side 3-1/4" Hollow Full Floater Hub Rear End Spindle Snout

Suggested: $694.00 Kartek Price: $585.20

Sold As: 1 Spindle Snout

Part Number: JAMJ7000RTT325R




Jamar Performance Trophy Truck Passenger Side 3-1/4" Hollow Full Floater Hub Rear End Spindle Snout

This spindle snout fits the rear 6 x 6.5 (6 lug on 6-1/2" Class 6100 or Trophy Truck pattern) floater hubs. Right hand thread weld on spindle. 3.12" major diameter on the threads, uses traditional AN16 style spindle nuts. Normally welds inside 4" x 0.250" wall axle tubes. Fits common 36 spline Class 6100 or Trophy Truck floater axles.

    Dimensions:
  • Completely Hollow
  • A Spindle length 3-1/8"
  • B Shoulder length 1"
  • C Weld Gap 7/16"
  • D Back shoulder length 3-3/4"
  • E Back shoulder diameter 3-1/2"
  • F Shoulder diameter 3-3/4"
  • G Spindle diameter 3-1/4"
  • 12 Threads per inch
  • 3.12" Major diameter on the threads
trophy truck 3-1/4 inch hollow full floater hub rear end spindle snout dimensions
Note: Jamar's snouts have a straight edge where the 3-1/4" diameter spindle (A) meets the 3-3/4" diameter seal shoulder (B). No special machine work is required on the inside edge of the bearing if you're using L116149 or 27687 hub bearings.

Related Parts

Scroll Top