Foddrill 2nd Gen Replacement 1-1/2" Dia Beam Spindle King Pin For Combo Link Or King Kong Spindles
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov The above image is a representation of this item. Actual item may vary. If it's crucial to what you're working on, call the store at 951-737-RACE, and one of our sales reps will be happy to email you a current photograph. Product Information:
Foddrill's replacement 1-1/2" diameter king pin. This is the second generation style that has an additional zerk fitting port on the bottom of the king pin. Will fit their combo link or king kong spindles that use the B-2420 Timken bearings. The bushings, bearings, washers, snap rings, link pin shims, and zerk fittings are all sold separately. The upper and lower holes are both 1-1/8" allowing you to run either 5/8" (18mm) link pins or 7/8" link pins.
Be sure to measure the diameter of your king pin. With Foddrill's spindles you can buy them with a variety of combinations for example:
Be sure to measure the diameter of your king pin. With Foddrill's spindles you can buy them with a variety of combinations for example:
- 1-1/2" king pin with Combo Link snouts
- 1-1/2" king pin with King Kong snouts
- 1-3/4" king pin with Combo Link snouts
- 1-3/4" king pin with King Kong snouts
Related Parts
7/8" ID Link Pin Shims For Adjusting The Camber On King Kong Link Pin Front Beams Set Of 40
In Stock
Price: $23.99
Heat Treated Alloy Heavy Duty 7/8" King Kong Link Pin Set For Aftermarket Front Trailing Arms
In Stock
Price: $194.99
EBBCO Offroad Aluminum 37" Toe In / Toe Out Wheel Alignment Plates For Wide 5 VW 205mm Pattern
In Stock
Price: $114.94