Fox 2.0 Piggy Back Or Rotating Reservoir Shock No Port Body Cap Threaded Underneath To Hold BOC Cup

Fox 2.0 Piggy Back Or Rotating Reservoir Shock No Port Body Cap Threaded Underneath To Hold BOC Cup

Suggested: $38.00 Kartek Price: $36.10

Sold As: 1 Shock Body Cap

Part Number: FOX20606070

MFG Number: 206-60-070




Fox 2.0 Piggy Back Or Rotating Reservoir Shock No Port Body Cap Threaded Underneath To Hold BOC Cup
206-06-070 This body cap is threaded underneath it for the allen bolt of the BOC cup. It is the same, regardless if you're building a 6-1/2", 8-1/2" or 10" stroke BOC shock.

Fox's bottom-out control provides extra resistance against bottom-outs.

As the shock is compressed, the secondary piston that threads onto your shock shaft above the rebound valving stack will enter the bottom-out cup in the final 25% of travel to produce up to 3000 lbs of additional damping force. This allows the shocks to be tuned to give improved small bump compliance in the upper portion of the stroke, while still maintaining the ability to absorb huge impacts effectively.

Important Notes:


  • You MUST use a longer shock body. Because the shock body is longer to house the piston and cup, the overall eye-to-eye length of the shock will be longer than what you currently have.
  • You MUST check the shock shaft length. If the shaft is too long, it will destroy the cup and piston.
  • You can ONLY use 1 back-up washer. That is the 0.100" thick washer on top of the rebound valving stack just below the nut. The overall length of this is so crucial that if you use 2 back up washers (standard on a shock) then the overall length will be too long.
Fox Shocks BOC Bottom Out Control Animation

Related Parts

Shock Body Cap O-Rings 2.0 Series [-130]
Shock Body Cap O-Rings 2.0 Series [-130]
Suggested: $1.00 You Pay: $0.95