Schmidty Racing 805-00-073-KIT For Fox Shock 2" Internal Floating Reservoir Piston With Bleed Hole
Note: These pistons are designed to fit Fox Shocks. They are NOT manufactured by Fox.
Estimate Shipping
Price: $37.04
In Stock
Sold As:
1 Piston
Part Number: SRS80500002KIT
MFG Number:
805-00-073-KIT
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Get rid of cavitation air bubbles in your shocks. Especially on piggyback coil overs or internal and external bypass shocks, where you can't flip the reservoir upside down to bleed it while filling the shock body with oil.
On some of the new style buggy, truck and UTV Fox shocks, they have a bleeder screw in the center of the piston to eliminate any air pocket underneath it. Because of that bleeder screw, you can no longer use a conventional 1/4"-20 thread IFP tool to set the depth or remove the piston. Instead, there's a special tool that sits on top of the piston and you turn the tool a quarter turn to grab onto the piston.
On some of the new style buggy, truck and UTV Fox shocks, they have a bleeder screw in the center of the piston to eliminate any air pocket underneath it. Because of that bleeder screw, you can no longer use a conventional 1/4"-20 thread IFP tool to set the depth or remove the piston. Instead, there's a special tool that sits on top of the piston and you turn the tool a quarter turn to grab onto the piston.
Note: When Fox switched from steel reservoirs to aluminum on their 2.0" shocks, all of the internal parts remained the same because the aluminum reservoir has the same inside diameter as the steel reservoir. The only difference, is the aluminum reservoir has a larger outside diameter than the steel. This piston will work in either reservoir.
Center hole uses countersunk flat head allen 10-24 coarse thread 3/8" long with 3/16" inside diameter o-ring.
Center hole uses countersunk flat head allen 10-24 coarse thread 3/8" long with 3/16" inside diameter o-ring.
