Quarter Turn Fastener Wingnut Countersunk Steel Button 0.550 Length For #6 Spring


Suggested: $2.59 Kartek Price: $2.39
Sold As:
1 Wingnut Button
Part Number: MSPMSF06555W
CA Prop 65 WarningQuarter Turn Fastener Wingnut Countersunk Steel Button 0.550 Length For #6 Spring
The manufacturer says this button has a 7/16" shank. The actual shank diameter of this button is 0.406"
3/8" = 0.375"
This button = 0.406"
7/16" = 0.4375"
For mounting sheet metal and fiberglass, quarter turn panel fasteners are the most practical fasteners requiring only one tool. Panel fasteners have been used in off-road racing for years due to their lightweight and durable design. Available in a variety of sizes to fit your specific needs.
Originally quarter turn fasteners came from the Military Aircraft industry. When they say #5 they are referring to the diameter of the button which is 5/16. Or if they say #6 they are referring to the diameter of the button which is 3/8. The length of the button is measured from the panel surface down to the bottom edge of the spring seat. Below is a picture.

dzus zeus
3/8" = 0.375"
This button = 0.406"
7/16" = 0.4375"
For mounting sheet metal and fiberglass, quarter turn panel fasteners are the most practical fasteners requiring only one tool. Panel fasteners have been used in off-road racing for years due to their lightweight and durable design. Available in a variety of sizes to fit your specific needs.
Originally quarter turn fasteners came from the Military Aircraft industry. When they say #5 they are referring to the diameter of the button which is 5/16. Or if they say #6 they are referring to the diameter of the button which is 3/8. The length of the button is measured from the panel surface down to the bottom edge of the spring seat. Below is a picture.

dzus zeus
Related Parts
Quarter Turn Fastener Spring Adjuster Tool For Tightening Loose Springs Or Adjusting Spring Height
Suggested:
$59.99
You Pay: $52.80
Quarter Turn Fastener Transfer Punch Puts A Punch Mark On The Back Side Of Your Panel For Drilling
Suggested:
$1.29
You Pay: $1.20
Pop Rivet For Quarter Turn Panel Fastener Tabs, Springs And Self-Ejecting Buttons
Suggested:
$0.25
You Pay: $0.14
Quarter Turn Panel Fastener 0.275" Height #6 Steel S-Springs For 1-3/8" Center To Center Tabs
Suggested:
$0.99
You Pay: $0.75
Quarter Turn Panel Fastener 0.375" Height #6 Steel S-Springs For 1-3/8" Center To Center Tabs
Suggested:
$0.99
You Pay: $0.75
Quarter Turn Panel Fastener 0.375" Height #6 Stainless Steel S-Springs For 1-3/8" Center To Center
Suggested:
$1.49
You Pay: $0.99
Tall Dimpled Quarter Turn Panel Fastener Tab For #6 Buttons And Springs With Flat Edge
Suggested:
$0.99
You Pay: $0.65
Short Dimpled Quarter Turn Panel Fastener Tab For #6 Buttons And Springs With Broke Edge
Suggested:
$0.95
You Pay: $0.75
Short Dimpled Quarter Turn Panel Fastener Tab For #6 Buttons And Springs With Flat Edge
Suggested:
$0.99
You Pay: $0.65
Dimpled Lightweight Quarter Turn Panel Fastener Tab For #6 Buttons And Springs With Broke Edge
Suggested:
$0.95
You Pay: $0.75
Dimpled Assembled Quarter Turn Panel Fastener Tab For #5 Or #6 Buttons With Flat Edge
Suggested:
$3.99
You Pay: $2.25