Kartek Off-Road Custom Made 4130 Chromoly Tie Rod For 5/8" Heim Joints And Rod Ends On Both Sides
We MUST know which brand of heim joints / rod ends that you're going to use. Each brand, FK Bearing, Aurora Bearing and NHBB New Hampshire Ball Bearings all have different tolerances on their thread, so we use different taps depending on the brand you're using.![Kartek Off-Road Custom Made 4130 Chromoly Tie Rod For 5/8" Heim Joints And Rod Ends On Both Sides Kartek Off-Road Custom Made 4130 Chromoly Tie Rod For 5/8" Heim Joints And Rod Ends On Both Sides](graphics/en-US/cssui/blank.gif)
![California proposition 65 warning California proposition 65 warning](../mm5/graphics/warning-symbol.png)
Description
We MUST know which brand of heim joints / rod ends that you're going to use. Each brand, FK Bearing, Aurora Bearing and NHBB New Hampshire Ball Bearings all have different tolerances on their thread, so we use different taps depending on the brand you're using.
American made using 1" x 0.250" wall Chromoly tubing at our Corona, CA location. Tie rods are made to order and are NOT REFUNDABLE!
Normally we tap one side left hand thread and the other side right hand thread. If you require both sides to be right hand thread then please put that in the notes above. BOTH ends of these tie rods are 5/8"-18 thread. Besides tie rods, they can be used as sway bar links, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, traction bars, or turn buckles.
Normally we tap one side left hand thread and the other side right hand thread. If you require both sides to be right hand thread then please put that in the notes above. BOTH ends of these tie rods are 5/8"-18 thread. Besides tie rods, they can be used as sway bar links, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, traction bars, or turn buckles.
![rod ends and heim joints assembly](../mm5/graphics/00000001/rod-ends-heim-joints-assembly.jpg)
![How is tie rod length measured?](../mm5/graphics/00000001/how-is-tie-rod-length-measured.jpg)