Fragola 1/8" NPT National Pipe Tapered Thread Blue Anodized Aluminum Allen Plugs

Dimensions for pipe thread are at the bottom of the page
Fragola 1/8" NPT National Pipe Tapered Thread Blue Anodized Aluminum Allen Plugs
NPT - National Pipe Tapered thread. Always remember that pipe thread fittings are measured INSIDE diameter not outside diameter of the threads. See diagram at bottom of this page.
Related Parts
White PTFE Pipe Thread Seal Tape 1/2 Inch Wide x 21.5 Foot Long Roll
Suggested:
$2.99
You Pay: $2.25
Fragola 1/8" NPT National Pipe Tapered Thread Black Anodized Aluminum Allen Plugs
Suggested:
$4.32
You Pay: $2.19
Fragola 1/8" NPT National Pipe Tapered Thread Blue Anodized Aluminum Hex Plugs
Suggested:
$4.45
You Pay: $3.07
Fragola 1/8" NPT National Pipe Tapered Thread Black Anodized Aluminum Hex Plugs
Suggested:
$4.45
You Pay: $3.07
Pipe Thread Dimensions:
1/16" NPT is 1/16" I.D. / 0.313 O.D.
1/8" NPT is 1/8" I.D. / 0.405" O.D.
1/4" NPT is 1/4" I.D. / 0.540" O.D.
3/8" NPT is 3/8" I.D. / 0.675" O.D.
1/2" NPT is 1/2" I.D. / 0.840" O.D.
3/4" NPT is 3/4" I.D. / 1.050" O.D.
1" NPT is 1" I.D. / 1.315" O.D.
1-1/4" NPT is 1-1/4" I.D. / 1.660" O.D.
1-1/2" NPT is 1-1/2" I.D. / 1.900" O.D.
2" NPT is 2" I.D. / 2.375" O.D.
1/16" NPT is 1/16" I.D. / 0.313 O.D.
1/8" NPT is 1/8" I.D. / 0.405" O.D.
1/4" NPT is 1/4" I.D. / 0.540" O.D.
3/8" NPT is 3/8" I.D. / 0.675" O.D.
1/2" NPT is 1/2" I.D. / 0.840" O.D.
3/4" NPT is 3/4" I.D. / 1.050" O.D.
1" NPT is 1" I.D. / 1.315" O.D.
1-1/4" NPT is 1-1/4" I.D. / 1.660" O.D.
1-1/2" NPT is 1-1/2" I.D. / 1.900" O.D.
2" NPT is 2" I.D. / 2.375" O.D.
