CBR 38x17 Dual Pass Aluminum Radiator And Heat Exchanger With Dual Fans Without Fill Neck
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Note: We normally stock these radiators with a standard 1-1/2" inlet and outlet. AN #16 and #20 bungs are custom made and usually take 4 to 5 weeks to make. If you can tig weld aluminum, we do sell separate #16 and #20 bungs if you want to weld them on yourself. Click here for the bungs
Inlet and outlet can be on the right side or left side simply by flipping the radiator over because there is no fill neck welded to the radiator.
Inlet and outlet can be on the right side or left side simply by flipping the radiator over because there is no fill neck welded to the radiator.
Standard Features:
Dual 16" Spal Fans
1-1/2" Radiator Hose Inlet And Outlet
-10 ORB Oil Cooler Inlet/Outlet
Available Upgrades:
AN Fitting Inlet And Outlet
Dual 16" Spal Fans
1-1/2" Radiator Hose Inlet And Outlet
-10 ORB Oil Cooler Inlet/Outlet
Available Upgrades:
AN Fitting Inlet And Outlet
This radiator is a lot deeper than most of our conventional radiators. It will NOT fit our weld on radiator mount.
Dimensions:
7" Deep not including the fans
10-1/2" Deep including the fans
38" Wide
17" Tall
Dimensions:
7" Deep not including the fans
10-1/2" Deep including the fans
38" Wide
17" Tall