Aeromotive 12635 - 40 Micron Stainless Mesh Post Filter Element 3" Long 1-5/8" Diameter 7/8" Opening

Cross reference part number: Weldon WEQ40MC

Replacement element for 12330, 12335, 12348, 12378, 12388 housings

Commonly the most overlooked component in a fuel system, filter neglect can be the most costly. If not cleaned or replaced regularly, filter elements can become clogged resulting in reduced fuel flow, engine performance and ultimately, fuel pump or even worse, engine damage. By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Severe duty applications or newly installed systems may require more frequent maintenance. How do you know what element you need for your filter? Several Aeromotive filters share the same housing, but the elements inside may be drastically different and putting the wrong filter or element in the wrong place could be costly for your fuel pump or your engine. To find out, look inside the inlet of the filter. Stamped on the top of the element is the micron rating. This will tell you what element you need for your filter.

Recommended for applications burning pump gas, racing gas, diesel fuel, jet fuel, avgas, etc

Approved for use in alcohol fuels including ethanol and methanol

Over 60 square inches of element surface area supports high flow while providing good service life

Flow capacity of up to 900 GPH (15.0 GPM) with less than 1-PSI pressure drop

Supports up to 8,300 Flywheel HP, Forced Induction, on gasoline

Supports up to 6,000 Flywheel HP, Forced Induction on Ethanol

Supports up to 2,800 Flywheel HP, Forced Induction on Methanol

Ideal as a post pump filter with gasoline, ethanol and methanol burning engines using medium to large electric pumps and 6 and 12 Series (belt and hex driven) mechanical fuel pumps