Fox Racing Shocks 2" Coil Over Body 10" Stroke 5/8" Diameter Shaft With DSC Piggy Back Reservoir

We build this shock in house to order because Fox has discontinued it.



Fox Racing Shocks 2" Coil Over Body 10" Stroke 5/8" Diameter Shaft With DSC Piggy Back Reservoir

Email us for current pricing and availability on part number FOX98306001




California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

Description

From the finish line at the Indy 500 to the deserts of Dakar, FOX coil-over shocks have proven themselves as winners year after year. FOX engineers work only with the best spring manufacturers to develop winning spring/shock combinations. Whether you are upgrading your daily driver or building an unlimited trophy truck, FOX has a coil-over shock to fit your needs.

Factory Series 983-06-001 Dimensions:
Setup For Dual Spring Rate
21" Maximum Combined Total Spring Length
Typically Customers Purchase 8" Top Spring and 12" Bottom Spring
2.0" Diameter
10.0" Travel
26.640" Extended
16.670" Collapsed
2" x 8" Reservoir
0.625" Shaft Diameter
1.25" Mounting Width Between Tabs
Uses 1/2" Shock Bolts

Parts Build List (per shock):
1) 980-02-005 Shock
1) 206-06-202-A or 206-06-070 Top Cap
1) 206-06-249-A Piggy Back Bridge
1) 815-04-022-KIT or 815-04-036-KIT Adjuster
2) 029-03-137 O-Rings For Bridge
1) 234-00-236-A Lock Ring For Bridge
2) 018-02-013-A Screws For Reservoir
1) 226-00-015-A Reservoir End Cap
1) 029-00-209-A O-Ring For Res Cap

Fox DSC Dual Speed Compression Adjuster
26 clicks high speed compression adjustability and 22 click low speed compression adjustability allows you to fine tune your ride from very soft to very firm. The best part is, you can adjust your Fox shock without having to take it apart! Ideal for people with 4 seat sand rails, dune buggies, baja bugs, jeeps, or rock crawlers. When you have 4 passengers adjust the compression stiffer to compensate for the extra passenger weight. When you drive alone or only have 1 passenger, adjust the compression softer for a softer ride.

Fox Shocks dual speed compression DSC adjuster
DSC Adjuster Note: When Fox says "low-speed" and "high-speed" they're referring to the shock shaft's velocity moving up and down. NOT the vehicle's speed. If you're cruising through the desert and your suspension is slowly moving up and down, then you're using the "low-speed" flat head screw driver adjustment on the adjuster. If you launch your vehicle and the suspension moves quickly upwards, then you're using the "high-speed" 17mm hex adjustment on the adjuster.

Fox Piggy Back Rotating Reservoir with DSC Adjuster

Related Parts

Scroll Top