Jamar Performance Pro-X Porsche 934 - 33 Spline Midboard Floater Hub Kit 6 Piston Calipers 12" Rotor
Price: $8,684.51
Call or email for availability
Sold As:
1 Complete Disc Brake Kit
Part Number: JAMJ9634
OUT OF STOCK
California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov
Description
Jamar's complete fully sealed disc brake hub kits include everything for both sides of the vehicle that you'll need, EXCEPT adapter fittings for whatever type of brake line you plan to use, lug nuts, and outer axle boots. The adapter fittings are listed below.
Future Upgrade Possibilities:
Later on, you can upgrade to 35 spline axles simply by changing the CV joint's star.
Specs:
This kit fits an industry standard 7" center 15 bolt arm plate (See above photo for trailing arm reference)
Calipers are six piston with 1-1/2" diameter pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Hubs have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
prm-934srmbhkit prm934srmbhkit proam pro am pro-am tatum motorsports fortin racing pme performance motorsports engineering midboard mid-board
What's Included:
Two 5 Lug VW Pattern (5 on 205mm) Hubs
Two 6 Piston Calipers With Pads
Two Hub Caps
Bearings
Seals
33 Spline GKN CV Joints Polished With 300m CV Cages
Inner Axle Boots
What's NOT Included:
Brake Line Adapter Fittings
Lug Nuts
Outer Axle Boots
Two 5 Lug VW Pattern (5 on 205mm) Hubs
Two 6 Piston Calipers With Pads
Two Hub Caps
Bearings
Seals
33 Spline GKN CV Joints Polished With 300m CV Cages
Inner Axle Boots
What's NOT Included:
Brake Line Adapter Fittings
Lug Nuts
Outer Axle Boots
Later on, you can upgrade to 35 spline axles simply by changing the CV joint's star.
Specs:
This kit fits an industry standard 7" center 15 bolt arm plate (See above photo for trailing arm reference)
Calipers are six piston with 1-1/2" diameter pistons
Uses standard DOT 3, DOT 4 or DOT 5.1 brake fluid
1/8" NPT pipe thread inlet (You'll need adapter fittings listed below)
Hubs have 14mm-1.5 thread studs pressed into them (You'll need to purchase lug nuts)
prm-934srmbhkit prm934srmbhkit proam pro am pro-am tatum motorsports fortin racing pme performance motorsports engineering midboard mid-board
