Harmon Racing Cells In Tank Fuel Discriminator And Roll Over Check Valve With 1" Inlet

Harmon Racing Cells In Tank Fuel Discriminator And Roll Over Check Valve With 1" Inlet

Suggested: $319.99 Kartek Price: $270.54

Sold As: 1 Discriminator / Roll Over Valve Combo

Part Number: HRCHDIS201V

MFG Number: HDIS-201V
CA Prop 65 Warning




Harmon Racing Cells In Tank Fuel Discriminator And Roll Over Check Valve With 1" Inlet
Discriminator valves prevent fuel from traveling up the vent line during filling when the tank is full. Utilizing a float, the valve shuts off air flow when fuel enters the chamber. The valve also operates independently and will close/shut off if overturned regardless if there is fuel in the chamber. Because of its ability to prevent fuel from traveling up the vent line and out the vehicle these have become popular on vehicles utilizing dry break and pressurized fill systems.

This particular valve bolts directly into your fill plate. You'll need to drill a 1-1/4" hole. The bottom has a steel ball acting as a roll over valve.

Note: It's always a good idea to run a filter at the end of your vent line. For example K&N 62-1080 listed below. Obviously, do not stick the filter directly onto your discriminator valve.

Dimensions:
  • Length Tip To Tip: 7-3/4"
  • Depth Inside Tank: 2-3/4"
  • Diameter: 2-1/4"
  • Inlet: 1"

  • harmon racing fuel cells discriminator discriminating discrimination discriminate in-tank check-valve

    Related Parts