Sway-A-Way RaceRunner Shocks Rebound Or Compression Valving Shims 0.010" Thick 0.900" OD 0.562" ID

Sway-A-Way RaceRunner Shocks Rebound Or Compression Valving Shims 0.010" Thick 0.900" OD 0.562" ID
Rough Shipping Estimate
Estimate Shipping
Price: $3.25
In Stock
Sold As: 1 Valving Shim

Part Number: SAWSVSHIM

MFG Number: 511190-010


Order this item to pickup at our Corona, CA store. You'll pay when you get here. You can pay by credit card, cash or PayPal and we'll contact you when this order is ready for pickup.


California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

Description

On a 2.0 or 2.5 Sway A Way Race Runner Shock, for example if you have #8/#12 stamped into it, would mean that you have #8 compression and #12 rebound. Occasionally, when you pull your shock apart, you might find a few shims that aren't all the same thickness because Sway-A-Way has installed custom valving inside your shock. The thicker your valving shims are, the slower your shock will react. The thinner your valving shims are, the faster your shock will react.

  • Rebound Valving:
    Are the shims on top of the piston. These shim stacks govern how fast the shock expands out to full extension.
  • Compression Valving:
    Are the shims below the piston. These shim stacks govern how fast the shock compresses.
  • #8 = All shims should be 0.008" thick = fast shock movement
  • #10 = All shims should be 0.010" thick
  • #12 = All shims should be 0.012" thick
  • #15 = All shims should be 0.015" thick
  • #20 = All shims should be 0.020" thick = slow shock movement


Related Parts

Scroll Top