Hella 4RD 931.410-081 Sealed 5 Blade 12 Volt 20/40 Amp Dual Circuit Relay Uses H84708001 Blue Plug

Hella 4RD 931.410-081 Sealed 5 Blade 12 Volt 20/40 Amp Dual Circuit Relay Uses H84708001 Blue Plug
Rough Shipping Estimate
Estimate Shipping
Price: $9.99
In Stock
Sold As: 1 Relay

Part Number: HELH41410081

MFG Number: 4RD 931.410-081


Order this item to pickup at our Corona, CA store. You'll pay when you get here. You can pay by credit card, cash or PayPal and we'll contact you when this order is ready for pickup.


California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

Description

Hella's universal sealed GM Weatherpack style 5 prong relays. If you're using this as a headlight relay, to figure out the amount of amps your lights are using, use the total wattage of your lights and divide that by the volts. For instance if your lights are 100w each then 100w ÷ 12v = 8.33a. So if you had four 100w lights using 33.33 amps and your toggle switch is only rated at 10 amp then you could use that 10 amp toggle switch to activate this 40 amp relay and be covered for the 33.33 amps of lights that you're running.

Typically used for:
  • Anything that requires a high amp load
  • Ignition: takes the amp load off your ignition switch
  • Lights: takes the amp load off your toggle switch
  • Fans: takes the amp load off your ECU
  • Fuel pump

  • The purpose of a relay is to get the load (amps) off of your switch or thermostat so you don't melt your switch or thermostat.

    hella 4rd 931-410-081 sealed 5 blade 12 volt 20/40 amp dual circuit relay uses h84708001 blue plug

    Wiring (Look at the numbers on the relay):


    • #86 wire is switched power on. The trigger wire from a toggle switch or thermostat.
    • #87 wire goes to your lights, starter solenoid, fuel pump, or radiator fans. This is a 40 amp circuit.
    • #87a wire is normally not used. When the toggle switch is turned OFF to 86 the 87a then becomes ON. This is a 20 amp circuit.
    • #30 wire is for 12v constant power. Obviously run a fuse or circuit breaker on this wire.
    • #85 is a ground wire.

    Related Parts

    Scroll Top