MTA 0100665/21 O-Ring Sealed Relay Box For Holding 4 Standard 5 Prong Relays Does Not Include Relays

MTA 0100665/21 O-Ring Sealed Relay Box For Holding 4 Standard 5 Prong Relays Does Not Include Relays
Email us for current pricing and availability
Sold As: 1 Relay Box Without Relays

Part Number: HELH84988007

MFG Number: 0100665/21


OUT OF STOCK



California proposition 65 warningCalifornia Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov

Description

Important Note: Always stop and look at the relay to note the positions of each number on each blade ! ! For example Hella's black 40 amp relays have their #30 constant power in a different position than the Hella blue fused relays. The blue fused relays will not fit in this box.

This box will fit the single circuit 4 prong relay 4RA 933.332-101 or the dual circuit 4RA 933.332-181 if you cut the tab off and need the extra 87A prong.

This little box is the cleanest way to setup four relays. It includes an o-ring sealed clear cover and the necessary 1/4" female terminals that snap into the bottom of the box. The box is about 5 inches long and 2 inches wide (not including the mounting tabs).

Wiring (look at the numbers on the relay NOT the box):

  • #86 wire is switched power on. The trigger wire from a toggle switch or thermostat
  • #87 wire goes to your lights, starter solenoid, fuel pump, or radiator fans
  • #87a wire is normally not used. When the toggle switch is turned OFF to 86 the 87a then becomes ON
  • #30 wire is for 12v constant power. Obviously run a fuse or circuit breaker on this wire
  • #85 is a ground wire

Related Parts

Scroll Top