Craftsman's 2-ton aluminum jack is a lightweight, yet powerful design that is easy to handle thanks to its weight and side handles.

Our Craftsman jacks are available with RaceWorks' mounting plate. This spring and latch locking design firmly locks the jack into place on a race car or chase vehicle but allows for quick removal and installation. The mounting plate on the jack also doubles as a skid plate.

At only 4.5 lbs, the billet aluminum Kwik Jak™ is lightweight but performs like its heavy duty cousins. It is powered by standard 3/8-24 CO2 cartridges and can lift up to 2400 lbs. in just seconds. Its collapsed height adjusts from an easily stowable 12.5” up to 18.5” and it has a 6” stroke.

Multiple jack pad configurations allow the Kwik Jak™ to work on almost any vehicle. Another benefit of the jack it that it fits in a standard race car fire extinguisher mount for easy accessibility on tube frame vehicles. Kits are also available to adapt the jack to your on-board CO2 system or to use larger refillable CO2 canisters.

Baja Designs Kwik Jak HD is the ultimate lifting solution for your race or play rig. The Kwik Jak HD is the big brother to the standard Kwik Jak offering 10 inches of lift stroke and a capacity of 2500 lbs! The Kwik Jak HD makes dreaded tire changes as painless as possible so you can spend less time wrenching and more time on the trail.

• 10 inches of lift in just seconds
• Lift capacity of 2500 lbs.
• Weighs only 8.5 lbs.
• Collapses to just 7 inches tall
• Compatible with most CO2 systems
• Easy for anyone to operate
** Compatible with PowerTank CO2 Systems

This remote hose kit & bottle was designed by Baja Designs to be used with their portable Kwik Jak. This bottle replaces the need for CO2 canisters that the jack uses with a refillable bottle that can be used for multiple uses before refilling.

Total Chaos now offers an aluminum skid plate for Craftsman jacks. These skid plates feature a front and rear lip for easier sliding on dirt, sand and rocks while providing a wide footprint to prevent sinking. The kit come with the necessary hardware to covert a Craftsman jack.

Dirt Tech's innovative jack mount allows for jack use in dirt or sand but also retains the jack's original factory wheels for use on hard surfaces. The kit includes an aluminum skid plate, 1/8" thick steel cradle and all necessary hardware

Kreger Big Wheel Kit allows for a Craftsman jack to be easily rolled under a car on hard pack and soft dirt. The tall wheels also raise the overall height of the jack to eliminate the need jack blocks for long travel cars.

The kit simply bolts on to the jack without needing any fabrication work

This heavy duty latch can be used for a variety of applications such as a quick release mount for a jack, spare tire mount or tailgate.

These 5-1/2" jack extensions are available for Craftsman 2-ton jacks. These provide for a study base that are safe to use.

These Prothane Jack Pads are designed to protect anything that you may be jacking up. They are made from polyurethane for durability and come in the standard Prothane red color.

An affordable race jack from FOA, This jack has a lift capability of about 18" and will lift that height in mere seconds using your 1/2" cordless impact driver. The 1/2" end goes directly into the top of the jack...no special socket required. Slip the lift pin into your previously installed 1/2" ID lift point, put the impact into the top of the jack and hit the trigger. Your vehicle is off the ground in seconds making for a fast, easy wheel change. It features a large billet foot to ensure stability.

The Race Jack comes complete with a mounting kit (to be welded on) and enough tube for adding 4 lift points on your vehicle.

Lift height-- 18"
Intial Lift point-- adjustable- 3"-16"
Weight-- 12lbs

The King Jack mounts on any roll bar using quick release pins for easy removal and installation. The only necessary modification is welding a pin receiver to a suspension piece (usually the lower A-arm) on each corner for a positive lifting point. Once the jack pin has been securely placed into a pin the jack is ready for lifting by using a 18 Volt Impact. Once fully extended, wheels can be removed and installed in minutes.

All German Motorsports' Dakar Series Jacking system is a quick action hydraulic jack that allows for time saving tire changes during a race. By being built as part of the car and utilizing the car's power steering system, in the field tire changes can be made as quickly as two minutes.

Watch this video to see how the system works!
- AGM DSJ -

Visit AGM's website or call us to learn more.