 2" Weld On Snout |
2" Weld-On Hollow Spindle Snouts |
|
| 2” weld-on hollow spindle snouts are traditional snouts that are CNC machined from 4130 chromoly steel and step machined to fit a variety of different caliper brackets to suit your need.
|
||
Part Number |
Description |
|
PRM-2INWHSRKIT
|
Right Hand Weld-On 2” Hollow Snout w/ Nut
|
|
PRM-2INWHSLKIT |
Left Hand Weld-On 2” Hollow Snout w/ Nut |
|
 2.5" Bolt On Snout |
2" & 2.5" Bolt-On Hollow Spindle Snouts |
|
| The 2" & 2.5" bolt-on hollow spindle snouts were designed for use with ProAm's line of full race hubs and uprights. The bolt-on design allows for interchangeability between 2” and 2.5” snouts while providing an exact alignment. They can also use a backing plate (PRM-2HSBPWNB) which allows you to design your own upright. |
||
Part Number |
Description |
|
PRM-2INBHSRHDKIT
|
Right Hand Bolt-On 2” Hollow Snout w/ Nut
|
|
PRM-2INBHSLHDKIT |
Left Hand Bolt-On 2” Hollow Snout w/ Nut |
|
PRM-TT2500SR |
Right Hand 2.5” Front Spindle Snout |
|
PRM-TT2500SL |
Left Hand 2.5” Front Spindle Snout |
|
 2.5" Rear Snout |
2.5" Rear Spindle Snouts |
|
These heavy duty spindle snouts are designed to be used on your rear axle housing. They use the same materials as the front 2.5” snouts and are available with either a short 3” and a long 4-1/2” engagement area to meet your needs. |
||
Part Number |
Description |
|
PRM-LRTS2500R
|
Right Hand Long 2.5” Rear Snout
|
|
PRM-LRTS2500L |
Left Hand Long 2.5” Rear Snout |
|
PRM-RTS2500R |
Right Hand Short 2.5” Rear Snout |
|
PRM-RTS2500L |
Left Hand Short 2.5” Rear Snout |
|
 |
2" Ford Front Spindle Snouts |
|
The 2” Ford spindle snouts are design to allow Ford trucks to use any brake hubs that are designed for 2” snouts with Ford’s stock I-Beam front suspension. The snouts feature a back pin that presses into the stock location of an I-Beam spindle for a more accurate alignment and a prefect weld. The snout also includes a relief that presses over the factory oil seal of the Ford spindle. Like all of our snouts, the Ford snout is made from 4130 chromoly. |
||
Part Number |
Description |
|
PRM-2INRNGRSR
|
Right Hand 83-97 2WD Ranger Snout
|
|
PRM-2INRNGRSL |
Left Hand 83-97 2WD Ranger Snout |
|
PRM-2INF150SR |
Right Hand 88-96 2WD F-150 Snout |
|
PRM-2INF150SL |
Left Hand 88-96 2WD F-150 Snout |
|
 |
CNC 2" Hollow Spindle Snout |
|
These 2" hollow spindle snouts are replacement spindle snouts for CNC's line of 2" front brake hub kits for buggies. Spindle nuts are also available. |
||
Part Number |
Description |
|
CNC-1449R |
2" Hollow Spindle, Right |
|
CNC-1449L |
2" Hollow Spindle, Left |
|
 |
Coleman Rear 2-1/2" Hollow Spindle Snouts |
|
These Coleman rear spindle snouts are 2-1/2" dia. snouts. They are designed to be used with Coleman's line of wheel hubs such as their Wide 5 series. Call for more information on non-Coleman hub applications. |
||
Part Number |
Description |
|
COL-GN8062 |
Left Rear 5x5 2-1/2" Spindle Snout |
|
COL-GN8061 |
Right Rear 5x5 2-1/2" Spindle Snout |
|
