Complete with grade 8 hardware, inner sleeves, and urethane bushings, these shackles aid in the relocation and installation of longer leaf springs. Available in 9" and 12" lengths, these 4130 chromoly shackles can help your ride achieve up to 18" of rear wheel travel. Factors such as keeping your bed, adding a fuel cell or building a complete cage all vary from one truck to the next. Mounting locations and leaf spring length determine actual lift and wheel travel gained when you install these shackles.

These shackles were designed to fit Ford (Ranger and F-150), Chevy/GMC 1500, and some Dodge trucks.

Specifications

• Laser cut plate and CNC bent
• Laser notched bushing sleeves
• 7.5” Center to center dimension
• MIG welded
• Urethane bushings included

TCF now offers a lowering shackle to level out the truck. This easy to install custom shackle is laser cut for precision and comes complete with new bushings and inner sleeves. They are exactly 1 1/2” longer than stock and will lower the rear end by 3/4” without compromising the factory ride or load capacity. The shackles can also be used with a variety of other sport truck lifts to achieve that any desired ride height and increase cornering capabilities.

To add extended leaf springs, the stock front spring hanger must be removed from the frame. Laser cut for precision, these weld on spring hangers include grade 8 hardware and are designed to work with aftermarket 2 1/2" wide leaf springs. Grinding and welding are necessary to install. These hangers fit Toyota pickups and are available for a 2 3/8" wide frame rail (84-95 2wd & 4wd pickups) and 2.75" wide frame rail (96-04 2wd & 4wd Tacoma).

These Ranger Shackle Mounts offer stronger leaf spring mount than stock. The drop mounts are available with either stock height or with a 1-1/2" drop for extra ride height and clearance.

To assist in the installation of TOTAL CHAOS 12" chromoly tubular shackles when installing aftermarket longer leaf springs, TC now offers these laser cut pre bent pivot gussets designed to box in and strengthen the mounting location. These gussets are intended to be used when mounting shackles on top of the frame rail or below the frame rail. These brackets are CNC laser cut and bent using 10 gauge mild steel. Only sold in sets of 4.