 |
Rear Torsion Adjusters | |
| These adjusters are welded into the middle of a torsion housing and are used to adjust the tension of the torsion bars. Fingers & set screws are available separately. | ||
Part Number |
Description |
|
SAW-7000 |
Sway-A-Way Standard Torsion Adjuster |
|
SAW-7001 |
Sway-A-Way Standard Finger Only, each |
|
SAW-7015 |
Sway-A-Way Wide Torsion Adjuster |
|
SAW-7020 |
Sway-A-Way King Kong Torsion Adjuster |
|
SAW-7023 |
Sway-A-Way King Kong Finger Only, each |
|
SAW-7011 |
Sway-A-Way Bolt Kit for 7000/7020 |
|
 |
IRS Pivots | |
| IRS Pivots are available in 10°, 12°, and 13° variations. The race versions are fabricated from chromoly steel. All pivots are 3/16” thick. | ||
Part Number |
Description |
|
SUS-04142 |
10° IRS Race Pivots |
|
SUS-04145 |
12° IRS Race Pivots |
|
SUS-04140 |
Standard 13° IRS Pivots, Uses Stock VW Pivot Bolt |
|
SUS-04143 |
Standard 13° IRS Race Pivots |
|
 |
IRS Stock Pivot Bolts & Washers | |
Part Number |
Description |
|
HAR-45 |
IRS Stock Pivot Bolt & Washers |
|
 |
IRS Race Pivot Bolts & Washers | |
All race pivot bolt components are sold separately. This allows you to customize the kit to fit your application. |
||
Part Number |
Description |
|
HAR-45R |
IRS 7/8” Race Pivot Allen Bolt |
|
HAR-A21678 |
7/8" Nylon Nut |
|
HAR-7/8FWST |
7/8" x 1.25" Thick Washer |
|
HAR-7/8FWS |
7/8" x 1.15" Thin Washer |
|
 |
IRS Pivot Bolt Stops | |
| Pivot bolt stops are used to prevent the IRS pivot bolt from loosening and backing out. The stop are welded on to your housing and are able to swing into place against the pivot bolt head. | ||
Part Number |
Description |
|
SUS-04148 |
Pivot Bolt Stops, Pair |
|
 |
Torsion Housing End Plates | |
| End plates allow for maximum travel without having the spring plates hitting any bolts. Sold in pairs. | ||
Part Number |
Description |
|
SUS-04138MS |
Standard End Plates |
|
SUS-04138CM |
Standard Chromoly End Plates |
|
SUS-04137 |
Chenowth End Plates |
|
 |
Torsion Housing End Caps | |
Part Number |
Description |
|
MRP-9545 |
Standard Max Torsion End Caps, Pair |
|
MRP-9545CNW |
Chenowth Max Torsion End Caps, Pair |
|
 |
JayCee VW Spring Retainers | |
JayCee billet spring plate retainers eliminate any tow in on a hard launch and helps keep the suspension stable at high speeds. The JayCee retainers are CNC machined from 6061 aluminum then polished for a high luster finish. The final touch is a CNC machined bronze bearing bushing installed. KARTEK stocks black while blue & red are available for special order. |
||
Part Number |
Description |
|
JYC-SPR |
Spring Plate Retainers |
|
 |
Spring Plate Collars | |
Part Number |
Description |
|
SAW-5409 |
3.500” Long Spring Plate Collar |
|
SAW-5406 |
5.910” Long Spring Plate Collar |
|
SAW-5407 |
7.810” Long Spring Plate Collar |
|
 |
Swing Axle Spring Plates | |
Part Number |
Description |
|
SAW-4101 |
2.935” Collar - Standard, use w/ 21-3/4” Bars |
|
SAW-4102 |
5.910“ Collar - Standard, use w/ 24-11/16” Bars |
|
SAW-4103 |
7.810” Collar - Standard, use w/ 26-9/16” Bars |
|
SAW-4501 |
2.935“ Collar - Chromoly, use w/ 21-3/4” Bars |
|
SAW-4502 |
5.910” Collar - Chromoly, use w/ 24-11/16” Bars |
|
SAW-4503 |
7.810” Collar - Chromoly, use w/ 26-9/16” Bars |
|
|
IRS Spring Plates | |
Part Number |
Description |
|
SAW-4201 |
2.935” Collar - IRS Spring Plate, use with 21-3/4” Bars |
|
SAW-4202 |
5.910” Collar - IRS Spring Plate, use with 24-11/16” Bars |
|
SAW-4203 |
7.810” Collar - IRS Spring Plate, use with 26-9/16” Bars |
|
 |
VW Axle Spacers | |
| These spacers are used to replace the stock spacers in swing axle & IRS applications | ||
Part Number |
Description |
|
KTK-2202 |
IRS Spacer Set |
|
KTK-2212 |
IRS Inner Spacer |
|
KTK-2222 |
IRS Outer Spacer |
|
SAW-2223 |
IRS Middle Spacer |
|
SAW-2201 |
Swing Axle Spacer Set |
|
 |
Swing Axle Shock Mounts | |
Part Number |
Description |
|
SUS-05104 |
Swing Axle Shock Mounts |
|
 |
IRS Arm Triple Shock Mounts | |
Part Number |
Description |
|
SUS-05101 |
Triple Shock Mounts, Use w/ SUS-05110 Trailing Arm Kit |
|
 |
IRS Trailing Arm Gusset Kit | |
| This gusset kit for stock VW trailing arms is made from 10 gauge steel plates for additional strength. Sold as a kit for a pair of arms. | ||
Part Number |
Description |
|
SUS-05110 |
IRS Trailing Arm Gusset Box Kit |
|
 |
IRS Bearing Housing Cap | |
Part Number |
Description |
|
SUS-05130 |
Bilet ITS VW Bearing Housing Cap |
|
